74 16901A Logic Analysis System Service Guide
6 Replacing Assemblies
Returning Assemblies
Before shipping the logic analyzer or assemblies to Agilent
Technologies, contact your nearest Agilent Technologies Sales
Office for additional details. To locate the sales or service
office near you, go to www.agilent.com/find/contactus.
1 Write the following information on a tag and attach it to
the part to be returned.
• Name and address of owner.
• Model number.
• Serial number.
• Description of service required or failure indications.
2 Remove accessories from the logic analyzer.
Only return accessories to Agilent Technologies if they are
associated with the failure symptoms.
3 Package the logic analyzer or assemblies.
You can use either the original shipping containers, or
order materials from an Agilent sales office.
4 Seal the shipping container securely, and mark it
FRAGILE.
For protection against electrostatic discharge, package the logic
analyzer in electrostatic material.
To Next Page
Loading...
Need help?
General
