16901A Logic Analysis System Service Guide 5
In this Service Guide
This book is the service guide for the 16901A logic analysis
system and is divided into eight chapters.
Chapter 1, “General Information” contains information about
the instrument’s characteristics.
Chapter 2, “Preparing for Use” tells how to prepare the
instrument for use.
Chapter 3, “Testing Performance” gives instructions on how
to test the performance of the instrument.
Chapter 4, “Calibrating and Adjusting” contains calibration
instructions for the instrument.
Chapter 5, “Troubleshooting” contains self- tests and
flowcharts for troubleshooting the instrument.
Chapter 6, “Replacing Assemblies” tells how to replace the
instrument and assemblies of the instrument, and how to
return them to Agilent Technologies.
Chapter 7, “Replaceable Parts” lists replaceable parts, shows
exploded views, and gives ordering information.
Chapter 8, “Theory of Operation” explains how the
instrument works and what the self- tests are checking.
Revision History
Table 1 Revision History
Revision Reason
16901-97002, November 2011
(this version)
Changes in replaceable part numbers and the
recovery procedure for the 16901A logic
analysis systems that are shipped with
Windows 7 installation (serial numbers
MY50370000 or greater)
16901-97001, June 2007 Corrected module interface board (MIB) part
number.
16901-97000, November 2006 First edition.
To Next Page
Loading...
Need help?
General
