Agilent Technologies 33500 Series User Manual

82
Chapter 2 Front-Panel Menu Operation
To Set up an Arbitrary Waveform
2
Insert, Remove, Copy and Paste Points
1Press Insert Point 15 times and watch the display carefully. You
will see 15 new waveform points at the same voltage level.
2Change the Point # to 220 and press Remove Point 20 times,
watching the display carefully as you do so in order to see the
points being removed from the waveform.

Agilent Technologies 33500 Series Specifications

General

Brand	Agilent Technologies
Model	33500 Series
Category	Laboratory Equipment
Language	English