13
Contents
Chapter 1 Agilent 33500 Series
30 MHz Function /
Arbitrary Waveform Generator 5
Agilent 33500 Series at a Glance 6
The Front Panel at a Glance 7
The Front-Panel Display at a Glance 8
Front-Panel Number Entry 9
The Rear Panel at a Glance 10
In This Book 11
Chapter 2 Specifications 17
Chapter 3 Quick Start 25
Quick Start 26
To Prepare the Waveform Generator for Use 27
To Adjust the Carrying Handle 29
To Set the Output Frequency 30
To Set the Output Amplitude 32
To Set a DC Offset Voltage 35
To Set the High-Level and Low-Level Values 37
To Output a DC Voltage 39
To Set the Duty Cycle of a Square Wave 40
To Configure a Pulse Waveform 42
To Select a Stored Arbitrary Waveform 44
To Use the Built-In Help System 45
To Rack Mount the Waveform Generator 48
Chapter 4 Front-Panel Menu Operation 51
Front-Panel Menu Operation 52
Front-Panel Menu Reference 53
To Select the Output Termination 57
To Reset the Waveform Generator 58
To Output a Modulated Waveform 59
To Output an FSK Waveform 61
To Output a PWM Waveform 63
To Output a Frequency Sweep 66
To Output a Burst Waveform 69
To Trigger a Sweep or Burst 72
To Store the Instrument State 73
To Configure the Remote Interface 75
To Secure and Unsecure the Instrument for Calibration 83
To Next Page
Loading...
Need help?
General
