Agilent Technologies 33522A Service Guide

39
Chapter 2 Quick Start
To Output a DC Voltage
4
2
To Output a DC Voltage
You can specify a constant DC voltage to be output
1Press
and then select More and DC.
The Offset value becomes selected.
2 Enter the desired voltage level as an Offset.
Enter 1.0 with the numeric keypad or knob and then press the V softkey
if you used the keypad.
You can enter any DC voltage from -5 V to +5 V into 50 , or -10 V to
+10 V into a high impedance load.

Agilent Technologies 33522A Specifications

General

Brand	Agilent Technologies
Model	33522A
Category	Laboratory Equipment
Language	English