Technical Support
If you have questions about your
shipment, or if you need
information about warranty,
service, or technical support,
contact Agilent Technologies:
In the United States: (800) 829-
4444
In Europe: 31 20 547 2111
In Japan: 0120-421-345
Or go to
www.agilent.com/find/assist
for information on contacting
Agilent in your country of specific
location. You can also contact your
Agilent Technologies
Representative.
Safety Symbols
Alternating current
Frame or chassis
terminal
Standby supply. Unit is not
completely disconnected
from AC mains when
switch is off
.
Caution, risk of electric
shock
Caution, refer to
accompanying documents
Earth ground terminal
1 S M 1 - A
The CE mark is a
registered trademark of the
European Community.
The CSA mark is a
registered trademark of the
CSA-International.
The C-tick mark is a
registered trademark of the
Spectrum Management
Agency of Australia. This
signifies compliance with the
Australian EMC Framework
regulations under the terms of
the Radio Communications
Act of 1992.
This text indicates that the
instrument is an Industrial
Scientific and Medical
Group 1 Class A product
(CISPER 11, Clause 4).
ICES/
NMB
-001
This text indicates product
compliance with the
Canadian Interference-
Causing Equipment
Standard (ICES-001).
Contains one or more of
the 6 hazardous substances
above the maximum
concentration value
(MCV), 40 Year EPUP.
To Next Page
Loading...
Need help?
General
