Contents
vi Operating Guide
Example Procedure for Changing the Number of
Digits of Resolution Displayed for More
Precise Measurements 2-19
Using the MATH Menu Keys 2-21
Overview of Scale/Offset Math Menu 2-21
To Use the Scale/Offset Math Menu 2-22
Example Procedure for Scale Function 2-22
Example Procedure for Offset Function 2-23
Example Procedure for Turning Off Math Mode 2-25
Example Procedure for Set Reference Function—Offset From the
Last Measurement Value (Seeing Digits Not Visible on the 12-
Digit Display) 2-25
Overview of Statistics (Stats) Menu 2-26
To Use the Stats Menu for Automatic and Continuous Statistical
Analysis 2-27
Example Procedure for Computing Stats 2-27
Example Procedure for Easy Viewing of Stats 2-28
Example Procedure for Filtering Data (Using Limits)
During Stats 2-29
Example Procedure for Configuring SINGLE to Initiate N
Measurements 2-30
Example Procedure for Turning Off Stats Mode 2-30
Using the LIMITS Menu Keys 2-31
Overview of Limits Menus 2-31
To Set and Use Automatic Limit Testing 2-32
Limits Testing Example 1—Flag and Stop Measuring
On Limits 2-32
Limits Testing Example 2—Flag On Limits but
Continue Measuring 2-34
Limits Testing Example 3—Use Analog Graph Display While
Adjusting/Aligning Input Signal 2-34
Limits Testing Example 4—Selecting Filtering Conditions of
Stats Computation 2-36
To Next Page
Loading...
