Chapter 2 Operating Your Frequency Counter
Introduction
Operating Guide 2-3
2
Where to Find Some Key Working Examples
• Example Procedure for Gate and External Arm page 2-17
• Example Procedure for Changing the Number of
Digits of Resolution Displayed for More Precise Measurements
page 2-19
• Example Procedure for Scale Function page 2-22
• Example Procedure for Offset Function page 2-23
• Example Procedure for Set Reference Function—Offset From the
Last Measurement Value (Seeing Digits Not Visible on the 12-
Digit Display)
page 2-25
• Example Procedure for Computing Stats page 2-27
• Limits Testing Example 1—Flag and Stop Measuring On Limits page 2-32
• Limits Testing Example 2—Flag On Limits but
Continue Measuring
page 2-34
• Limits Testing Example 3—Use Analog Graph Display While
Adjusting/Aligning Input Signal
page 2-34
• Limits Testing Example 4—Selecting Filtering Conditions of
Stats Computation
page 2-36
• Limits Testing Example 5—Sending the Limit-Detect Output to
the RS-232 Serial Port
spage 2-38
To Next Page
Loading...
