Agilent Technologies 53181A - To Use on Prompted Help Messages (MATH HELP: NO;YES, PRT HELP: NO;YES)

Chapter 2 Operating Your Frequency Counter
Using Entry/Select (Arrow) Keys
2-10 Operating Guide
2
– Limit Modes
–Scale & Offset
– Stats
– Trigger/Sensitivity
–50Ω/1MΩ
–DC/AC
–X10 Attenuate
– 100kHz Filter
–Save & Print
– Utility Menu
•The +/− key is ignored during the state changing operating mode.
To Use on Prompted Help Messages (MATH HELP: NO/YES, PRT
HELP: NO/YES)
• When MATH HELP: YES is displayed, press Enter key to display the “(MEAS
x SCALE) + OFFS = RESULT” message.
• When PRT HELP: YES is displayed, press Enter key to display the
“CONFIGURE PORT ON UTILITY MENU; REMEMBER TO SAVE
SETUP FIRST” instruction.