Chapter 1 Getting Started
Making Measurements
Operating Guide 1-25
1
1 102 Mega Upper Limit
2 101 Mega Scale/Offset Measurement
Figure 1-1. 102 Mega Upper Limit Setting
Setting the Lower Limit
Press the arrow keys as shown in the following steps to set the lower limit value.
Press the s key nine times to cause the Counter to display your entry in hundreds of
Mega units as shown in the following step.
NOTE BE SURE to press the Enter key to enter the 100 Mega value.
1
2
Uppr &
Lower
Enter
M
M
M
To Next Page
Loading...
