Chapter 1 Getting Started
Making Measurements
1-26 Operating Guide
1
Limits should now be set as shown in Figure 1-2.
1 102 Mega Upper Limit
2 101 Mega Scale/Offset Measurement
3 100 Mega Lower Limit
Figure 1-2. 100 Mega Lower and 102 Mega Upper Limits Settings
Figure 1-3 represents what transpired during this Math and Limits procedure.
Figure 1-3. Math and Limits Results
1 Raw Measurements
2 Math
3 Limits
4 Measurements (Scale/Offset Results) within
Limits
1
2
3
To Next Page
Loading...
