Chapter 1 Getting Started
Making Measurements
Operating Guide 1-21
1
Press the s key six more times to cause the Counter to display your entry in Mega
units as shown in the following step.
The leftmost “0” digit in the OFFSet display is highlighted, indicating that if you
press d key once the displayed value will increase to 1 Mega (that is, 1E6) as shown
in the following step.
NOTE BE SURE to press the Enter key to enter the 1 Mega value.
The Offset is now set to 1 Mega.
Displaying the Math Results
The Counter displays the modified measurement results, which are based on the scale
and offset values that you selected in the previous steps. (For more details and real
applications of the Math Scale and Offset operations, refer to the appropriate section
in Chapter2, “Operating Your Frequency Counter.”)
M
Enter
M
M
Run
Freq Ch 1
M
To Next Page
Loading...
