Chapter 2 Operating Your Frequency Counter
Using the Save and Recall Menus
2-48 Operating Guide
2
Using the Save and Recall Menus
Overview of Save and Recall Functions
The combined use of the Save and Recall functions allows you to save and recall the
measurement setups which determine how the Counter measures, analyzes, and
reports answers. A setup can include the measurement to be made, the precision
desired, offset and scaling factor to apply, limits to be met, and statistics to compute.
Setups can also control printing of hardcopy. Setups saved to memory registers are
preserved when the Counter is powered down or disconnected from a power source.
The Save and Recall functions enable faster and easier operation, fewer operator
errors, and minimum training.
The Save and Recall keys allow you to:
• create and save up to 20 different instrument measurement setups into internal
non-volatile memory (SAVE:).
• recall up to 20 user-selected measurement setups that were previously saved
(RECALL 1, 2, 3, ... 20). With a total of 21 save/recall registers, there are 20
registers available to you for save/recall operations. The Counter automatically
saves the current setup to register 0 (RECALL 0) before executing a recall
function.
• delete any of the saved setups (UNSAVE:).
Recall Save &
Print
Local
Utility
To Next Page
Loading...
