Chapter 1 Getting Started
Making Measurements
1-32 Operating Guide
1
Perform the following steps to select the IN LIMIT choice in the USE display if you
want the Counter to compute statistics on only frequency measurements within the
limits you set.
Since the Limits were set to 100 Mega and 102 Mega values that are based on a scale
of 10 and offset of 1 Mega, you must re-enable Math now to get the measurements to
be within the limits. Perform the following steps.
Display 1, 7/13/92
Display 1, 7/13/92
Stats
Display 1, 7/13/92
Scale &
Offset
Display 1, 7/13/92
To Next Page
Loading...
