Chapter 1: General Information
Specifications and Characteristics
1–9
I/O ports
LAN
GPIB
RS-232 (serial)
Parallel
PS/2
USB
Video output
Dual-monitor video output
Auxiliary output
Trigger output
Time base reference output
RJ-45 connector, supports 10Base-T and 100Base-T. Enables
Web-enabled remote control, e-mail on trigger or demand, data/file
transfers and network printing.
IEEE 488.2, fully programmable.
COM1, printer and pointing device support.
Centronics printer port.
2 ports. Supports PS/2 pointing and input devices.
2 ports. Allows connection of USB peripherals and pointing devices while
the oscilloscope is on.
15 pin VGA, full color output of scope waveform display.
15 pin XGA, full color output for using third-party applications.
DC (±2.4 V); square wave (~715 Hz and 456 MHz); trigger output
(255 mV p-p into 50Ω).
5 V 50
Ω back-terminated.
10 MHz, 5 V 50 Ω back-terminated.
To Next Page
Loading...
Need help?
General
