EasyManuals Logo
Home>Agilent Technologies>Test Equipment>54853A

Agilent Technologies 54853A User Manual

Agilent Technologies 54853A
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Chapter 1: General Information
Specifications and Characteristics
1–5
Specifications and Characteristics
The following table lists the specifications and characteristics for the Agilent Technologies
54853A, 54854A, and 54855A Infiniium Oscilloscopes. Asterisks (*) denotes warranted
specifications, all others are typical. Specifications are valid after a 30 minute warm-up period,
and within
± 5 °C from the self-calibration temperature.
Vertical
Input channels 4
Analog bandwidth (-3 dB)* 54855A: 6 GHz 54854A: 4 GHz 54853A: 2.5 GHz
Rise time (10% to 90%) 54855A: 70 ps 54854A: 105 ps 54853A: 155 ps
Input impedance 50
±2.5%
Sensitivity
1
1 mV/div to 1 V/div
Input coupling DC
Vertical resolution
2
8 bits, 12 bits with averaging
Channel to channel isolation
(any two channels with equal V/div settings)
DC to 100 MHz: 40 dB
100 MHz to 1 GHz: 28 dB
>1 GHz to 6 GHz: 24dB
DC gain accuracy*
1
±1% of full scale at full resolution channel scale
Maximum input voltage* 5 Vrms, CAT I
Offset range > ±12 div or ±4 Volts, whichever is smallest
Offset accuracy*
1
± (2% of channel offset +1% of full scale)
Dynamic range ± 4 div from center screen
DC voltage measurement accuracy*
1
Dual cursor
Single cursor
± [(DC gain accuracy)+(resolution)]
± [(DC gain accuracy)+(offset accuracy)+(resolution/2)]
Horizontal
Main sweep time scale range 54855A: 5 ps/div to 20 s/div
54854A: 5 ps/div to 20 s/div
54853A: 10 ps/div to 20 s/div
Main sweep time delay range -200 s to 200 s
Delayed sweep time scale range 1 ps/div to current main time scale setting
Channel deskew range -50 µs to 150 µs
Time scale accuracy
3
±1 ppm pk
Delta-time measurement accuracy
6,7
256 Averages: 70 fs rms, ± [ (0.5 ps) + (1 x 10
-6
x |reading|) ] peak
Averaging disabled: 2.0 ps rms, ± [ (7.0 ps) + (1 x 10
-6
x |reading|) ] peak
Jitter measurement floor
6
Time interval error:
Period jitter:
N-cycle, cycle-cycle jitter:
54855A: 1.4 ps rms 54854A: 1.8 ps rms 54853A: 2.0 ps rms
54855A: 2.0 ps rms 54854A: 2.5 ps rms 54853A: 3.0 ps rms
54855A: 2.4 ps rms 54854A: 3.8 ps rms 54853A: 4.5 ps rms
!

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Agilent Technologies 54853A and is the answer not in the manual?

Agilent Technologies 54853A Specifications

General IconGeneral
BrandAgilent Technologies
Model54853A
CategoryTest Equipment
LanguageEnglish

Related product manuals