116 Troubleshooting and Maintenance Manual
7 Replacement Parts
Vacuum System
This section lists replacement parts available for the vacuum system. It
includes clamps, O-rings and seals (Table 11), foreline pump and related
components (Table 12), and turbo pump vacuum system components
(Table 13).
O-rings and seals
Table 1 1 O-rings and seals
Description Part number
Calibration valve O-ring (1/4-inch) 5180-4182
End plate O-ring (for front and rear end plates) 0905-1441
GC/MS interface O-ring 0905-1405
Slicer O-ring 0905-1518
TOF manifold O-ring 0905-1577/
0905-1576
KF10/16 seal (foreline pump inlet and turbo pump outlet) 0905-1463
KF25 O-ring assembly (turbo pump outlet) 0100-1551
Seal, turbo pump inlet 0100-1879
O-ring, forepump drain plug 0905-1619
Fill plug, forepump 0100-2451
Analyzer ion gauge G1960-80303
Foreline ion gauge G1960-80101
O-ring, forepump fill plug 0905-1630
O-ring, ion gauge 0905-1627
O-ring, collision cell feedthrough 0905-1405
O-ring, collision cell plate 0905-1689
Window gasket G7005-40015
To Next Page
Loading...
