89
Agilent 7200 Accurate-Mass Q-TOF GC/MS System
Troubleshooting and Maintenance Manual
Agilent Technologies
5
CI Maintenance
To Minimize Foreline Pump Damage from Ammonia 90
To Replace the Methane/Isobutane Gas Purifier 91
To Clean the Reagent Gas Supply Lines 92
To Refill the CI Calibration Vial 93
This chapter describes maintenance procedures and requirements that are
unique to an Agilent 7200 Accurate-Mass Q-TOF GC/MS System equipped with
the Chemical Ionization hardware.
To Next Page
Loading...
