12 Installation and First Startup
1 Installation
Any
non-Agilent
any
non-Agilent
User must determine
connection method
• GC + HS
(additive)*
• HS controls
carrier flow
• Determine best modes and use cases
based on similar Agilent hardware.
Required hardware:
• G4562A Carrier Gas EPC Module
Accessory.
Table 3 Supported headspace sampler–GC connections and control modes (continued)
Inlet type GC models Connection type Supports HS
carrier mode(s)
Comments
* Requires G4562A Carrier Gas EPC Module Accessory
To Next Page
Loading...
