Installation and First Startup 3
Contents
1 Installation
Before You Begin 6
Tools required for installation 6
Personnel needed for installation 6
Parts supplied with the instrument 7
Verify site preparation 8
Prepare the GC and data system 8
Determine how you will connect the headspace sampler to the GC 9
Install the GC consumables needed for HS checkout 13
Inspecting the Headspace Sampler 14
Place the Headspace Sampler on the Bench 15
Install the Configuration Plug 17
Verify the available power configuration 17
Install the configuration plug 18
Install the Vial Tray (111 Vial Model Only) 21
Connect Cabling 26
Cabling diagrams for Agilent GCs 27
Other systems 28
Connect Gas Supplies 30
Connect the vial pressurization gas 31
Connect the carrier gas (using GC inlet carrier control) 32
Connect the Transfer Line to the GC 35
Install the transfer line to the Headspace 36
Attach the transfer line to a GC inlet 45
Install the transfer line support bracket 47
Turn On the Headspace Sampler 49
Set the IP Address 50
To set the LAN address at the keyboard 50
To use a DHCP server 50
Configure the Headspace Sampler 51
To Next Page
Loading...
Need help?
General
