7-4
Options and Accessories
Analyzer Options Available
Option 075, 75 Ω Impedance (ES Only)
Option 075 offers 75 ohm impedance bridges with type-N (f) test port connectors.
Option 1CM, Rack Mount Flange Kit Without Handles
Option 1CM is a rack mount kit containing a pair of flanges and the necessary hardware to
mount the instrument, with handles detached, in an equipment rack with 482.6-mm (19
inches) horizontal spacing.
Option 1CP, Rack Mount Flange Kit With Handles
Option 1CP is a rack mount kit containing a pair of flanges and the necessary hardware to
mount the instrument with handles attached in an equipment rack with 482.6 mm (19
inches) spacing.
Service and Support Options
Agilent Technologies offers many repair and calibration options for your analyzer. Contact
the nearest Agilent Technologies sales or service office for information on options available
for your analyzer.
To Next Page
Loading...
Need help?
General
