7-10
Options and Accessories
Accessories Available
• 11856A 75 Ω BNC accessory kit
Contains 75 Ω type-N to 75 Ω BNC adapters for both connector sexes, a BNC male short
and BNC male termination.
• 11906A 7-16 to 7-16 adapter kit
Contains one 7-16(m) to 7-16(m) adapter, one 7-16(f) to 7-16(f) adapter, and two 7-16(m)
to 7-16(f) adapters.
• 11906B 7-16 to 50 Ω type-N adapter kit
Contains adapters for type-N (m) to 7-16(m), type-N (m) to 7-16(f), type-N (f) to 7-16(m),
and type-N (f) to 7-16(f).
• 11906C 7-16 to 7-mm adapter kit
Contains two 7-mm to 7-16(m) adapters and two 7-mm to 7-16(f) adapters.
• 11906D 7-16 to 3.5-mm adapter kit
Contains adapters for 3.5-mm(m) to 7-16(m), 3.5-mm(m) to 7-16(f), 3.5-mm(f) to
7-16(m), and 3.5-mm(f) to 7-16(f) adapters.
Test Configuration Accessories
RF Limiter
Externally attaches to one or both test ports of the analyzer. Provides protection against
potential high-power transients from external devices.
• 11930A 7-mm RF limiter, DC to 6 GHz, max power +28 dBm typical
• 11930B 50 Ω type-N RF limiter, 5 MHz to 6 GHz, max power +28 dBm typical
Probe
85024A high-frequency probe
Provides high-impedance in-circuit test capability, from 300 kHz to 3 GHz.
Amplifier
8347A RF power amplifier
Used to set leveled output power or increase system dynamic range, from 100 kHz to
3 GHz.
8347A RF power amplifier
Used to set leveled output power or increase system dynamic range, from 100 kHz to
3 GHz.
Power Meters
For more accurate control of leveled test-port power. Requires a 8480-series power sensor
and an GPIB cable for connection to the 8753ET or 8753ES.
• E4418B single-channel power meter
• E4419B dual-channel power meter
To Next Page
Loading...
Need help?
General
