7-6
Options and Accessories
Accessories Available
• 85032F 50 Ω type-N calibration kit (30 kHz to 9 GHz)
Contains a female and male open and short, female and male load standard, and a
torque wrench.
— Option 500
Adds four type-N to 7- mm adapter.
• 85033D 3.5-mm calibration kit
Contains fixed loads, one-piece open and short circuits, and 7-mm to 3.5-mm adapters
for both connector sexes for use with 7-mm test-port cables.
— Option 001
Deletes 7-mm to 3.5-mm adapters.
These adapters are not needed when this kit is used exclusively with an 8753ET
system.
— Option 002
Adds 50 Ω type-N to 3.5-mm adapters for the 8753ET only.
• 85033E 50 Ω 3.5-mm calibration kit (30kHz to 9 GHz)
Contains a female and male open and short, female and male load standard, and a
torque wrench.
— Option 400
Adds four 3.5 mm to Type-N adapters.
— Option 500
Adds four 3.5 mm to 7- mm adapters.
• 85038A 50 Ω 7-16 calibration kit (30 kHz to 7.5 GHz)
Contains male and female open and short circuits, fixed loads and wrenches.
• 85038F 50 Ω 7-16 calibration kit (30 kHz to 7.5 GHz)
Contains a female fixed load, open and short circuits, and 7-16 (f) to 7-16 (f) adapter.
• 85038M 50 Ω 7-16 calibration kit (30 kHz to 7.5 GHz)
Contains a male fixed load, open and short circuits, and a 7-16 (m) to 7-16 (m) adapter.
• 85036B 75 Ω type-N calibration kit
Contains fixed loads, open and short circuits, and 50 Ω type-N to 70 Ω type-N adapters
(m) and (f).
• 85039B 75 Ω type-F calibration kit
Contains 75 Ω male/female open, short and load standards and precision adapters
type-N (f) to F (m), type-N (m) to F (f), type-F (m) to F (m) and type-F (f) to F (m)
adapters.
— Option 00M male standards kit
Includes male open, short and load standards and precision F (m) to F (m) adapter.
— Option 00F female standards kit
Includes female open, short and load standards and precision F (f) to F (f) adapter
To Next Page
Loading...
Need help?
General
