Agilent Technologies E4402B - Mode Setup - GSM;EDGE, W-CDMA, cdma2000, PDC

Chapter 2 161
Front-Panel Key Reference
Mode Setup
GSM/EDGE Sets the specific parameters for the selected
measurement (located under the “MEASURE” key
description) appropriate for industry standard
GSM/EDGE. All measurements are available for this
standard except Channel Power, ACP, and Occupied
BW.
Key Access:
Mode Setup, Radio Std
W-CDMA
3GPP
Sets the specific parameters for the selected
measurement (located under the “MEASURE” key
description) appropriate for industry standard
W-CDMA. All measurements are available for this
standard.
Key Access:
Mode Setup, Radio Std
cdma2000
SR1
Sets the specific parameters for the selected
measurement (located under the “MEASURE” key
description) appropriate for industry standard
cdma2000-SR1. All measurements are available for this
standard.
Key Access:
Mode Setup, Radio Std, More
cdma2000
SR3-MC
Sets the specific parameters for the selected
measurement (located under the “MEASURE” key
description) appropriate for industry standard
cdma2000:SR3-MC. All measurements are available for
this standard.
Key Access:
Mode Setup, Radio Std, More
cdma2000
SR3-DS
Sets the specific parameters for the selected
measurement (located under the “MEASURE” key
description) appropriate for industry standard
cdma2000:SR3-DS. All measurements are available for
this standard.
Key Access:
Mode Setup, Radio Std, More
PDC
Sets the specific parameters for the selected
measurement (located under the “MEASURE” key
description) appropriate for industry standard PDC.
The Burst Power measurement is not available when
Device (BTS) is selected. The Channel Power
measurement is not available when
Device (MS) is
selected. All other measurements are available for this
standard.