162 Chapter 2
Front-Panel Key Reference
Mode Setup
Key Access: Mode Setup, Radio Std, More
Bluetooth™
Sets the specific parameters for the selected
measurement (located under the “MEASURE” key
description) appropriate for industry standard
Bluetooth™. All measurements are available for this
standard except Channel Power, ACP, and Occupied
BW.
Key Access:
Mode Setup, Radio Std, More
Std Setup
Accesses the key menu for selecting the device, packet type, or signal
bandwidth to be measured.
Key Access:
Mode Setup
Device
BTS MS
Allows you to select either the base transmitter station
(BTS) or the mobile station (MS) for all radio standards
except Bluetooth™.
Key Access:
Mode Setup, Std Setup
Packet Type
DH1 DH3 DH5
Allows you to select the packet type for Bluetooth™
measurement.
Key Access:
Mode Setup, Std Setup
Signal BW
3.00000000 MHz
Allows you to set the measurement bandwidth when
Radio Std (None) is selected.
Key Access:
Mode Setup, Radio Std, None, Std Setup
To Next Page
Loading...
Need help?
General
