Chapter 2 205
Front-Panel Key Reference
System (Local)
Key Access: System, Power On/Preset, Preset Type
Save User
Preset
Saves the active state of the analyzer into the User
Preset register for recall on
Preset if Preset (User) is
selected. Refer to “Preset” in this chapter for more
information.
Key Access:
System, Power On/Preset
Time/Date
Accesses the following Time/Date menu keys used to set and display the
real-time clock:
Key Access:
System
Time/Date
On Off
Turns the display of the real-time clock on or off.
Key Access:
System, Time/Date
Date Format
MDY DMY
Changes the display of the date from a month-day-year
format to a day-month-year format.
Key Access:
System, Time/Date
Set Time
Allows you to set the time of the real-time clock. Enter
the time in 24 hour HHMMSS format, using the
numeric keypad and pressing
Enter. Valid hour (HH)
values are from 00 to 23. Valid minute (MM) and second
(SS) values are from 00 to 59.
Key Access:
System, Time/Date
Set Date
Allows you to set the date of the real-time clock. Enter
the date in the YYYYMMDD format using the numeric
keypad and press
Enter. Valid year (YYYY) values are
0000 through 9999. Valid month (MM) values are from
01 to 12, and valid day values are from 01 to 31.
Key Access:
System, Time/Date
Alignments
Accesses the following Alignments menu keys which align the internal
circuitry of the analyzer, load default values for the alignment system,
and adjust the 10 MHz reference.
Key Access:
System
Auto Align
Accesses the Auto Align menu keys.
All Turns on the automatic alignment of all
measurement systems. When
Auto
Align
, All is selected, “AA” appears along
the left edge of the display.
Key Access:
System, Alignments
To Next Page
Loading...
