Appendix B 117
SCPI Command Reference
:CALC{1-4}:TRAN:DIST:LPFR
:CALC{1-4}:TRAN:DIST:LPFR
Syntax :CALCulate{[1]|2|3|4}[:SELected]:TRANsform:DISTance:LPFRequency
Description For the active trace of channel 1 (:CALC1) to channel 4 (:CALC4), changes the frequency
range to match with the low-pass type transformation of the transformation function of the
fault location function. (No query)
Related commands :CALC{1-4}:TRAN:TIME:LPFR on page 132
:CALC{1-4}:TRAN:DIST:STAT on page 121
:CALC{1-4}:TRAN:DIST on page 112
Equivalent key [Analysis] - Fault Location - Set Freq Low pass
To Next Page
Loading...
