Agilent Technologies ENA Series

150 Appendix B
SCPI Command Reference
List by function
SRL Command list
List by function
Table B-1 shows the SRL SCPI command list by function.
Table B-4 SCPI command list by function
Function Setting/execution item Command
Structural
Return Loss
ON/OFF :CALC{1-4}:SRL on page 143
Averaging impedance value automatic calculation /
manual entry selection
:CALC{1-4}:SRL:IMP:AUTO on page 147
Cutoff frequency :CALC{1-4}:SRL:IMP:AUTO:CUT on page 148
Averaging impedance value manual entry :CALC{1-4}:SRL:IMP:MAN on page 149
Port 1,2 connector
configure
Connector Length :CALC{1-4}:SRL:CONN{1-2}:LENG on page 146
Capacitance :CALC{1-4}:TRAN:DIST on page 112
Connector length /
capacitance automatic
calculation
:CALC{1-4}:SRL:CONN{1-2}:IMM on page 145
Read averaging impedance
value
:CALC{1-4}:SRL:CONN{1-2}:IMP? on page 145