156 Appendix C
COM Object Reference
Object Type
Notational Rules of COM Objects
This section describes the rules for the description of the COM objects in this chapter.
Object Type
Part with heading “Object type” describes the type of the E5061A/E5062A COM object.
The E5061A/E5062A provides properties and methods as the types of COM objects. In the
E5061A/E5062A COM objects, COM objects to set (send)/read (return) the state of the
E5061A/E5062A using variables are defined as property and ones to prompt some kind of
processing as method.
Syntax
Part with heading “Syntax” describes the syntax to send a COM object from the
E5061A/E5062A VBA to the E5061A/E5062A. The syntax consists of the object part
and the set/read part, with an equal “=” inserted between them. Variables are indicated by
italicized letters. Variables with () are indices. For indices with () having their preset
values, you can omit “(variable),” and, if omitted, the preset values are automatically set.
There are the following 3 types of syntax for coding using objects.
"Object (property) = variable": to set the stat of the E5061A/E5062A.
variable=object (property): to read the stat of the E5061A/E5062A.
"Object (method)": to make the E5061A/E5062A perform some processing.
Description
Part with heading “Description” describes how to use the COM object or the operation
when executed. COM objects used only to read the state of the E5061A/E5062A are
indicated with “Read only” and ones used only to set the state of the E5061A/E5062A “No
read.”
To Next Page
Loading...
