Appendix B 125
SCPI Command Reference
:CALC{1-4}:TRAN:DIST:UNIT
:CALC{1-4}:TRAN:DIST:UNIT
Syntax :CALCulate{[1]|2|3|4}[:SELected]:TRANsform:DISTance:UNIT {METers|FEET}
:CALCulate{[1]|2|3|4}[:SELected]:TRANsform:DISTance:UNIT?
Description For the active trace of channel 1 (:CALC1) to channel 4 (:CALC4), selects the distance
unit of the fault location display.
Parameters
Query response {MET|FEET}<newline><^END>
Example of use 10 OUTPUT 717;":CALC1:TRAN:DIST:UNIT MET"
20 OUTPUT 717;":CALC1:TRAN:DIST:UNIT?"
30 ENTER 717;A$
Related commands :CALC{1-4}:TRAN:METH on page 126
Equivalent key [Analysis] - Fault Location - Unit - Seconds|Meters|Feet
Description
METers Specifies the meters.
FEET Specifies the feet.
To Next Page
Loading...
