Agilent Technologies ENA Series

162 Appendix C
COM Object Reference
SCPI.CALCulate(Ch).SELected.TRANsform.DISTance. IMPulse.WIDTh
SCPI.CALCulate(Ch).SELected.TRANsform.DISTance.
IMPulse.WIDTh
Object type Property
Syntax SCPI.CALCulate(Ch).SELected.TRANsform.DISTance.IMPulse.WIDTh = Value
Val ue = SCPI.CALCulate(Ch).SELected.TRANsform.DISTance.IMPulse.WIDTh
Description For the active trace of channels 1 to 4 (Ch), sets the shape of the Kayser Bessel window
using the impulse width used for the transformation function of the fault location function.
Variable
For information on the variable (Ch), see Table C-2, “Variable (Ch),” on page 159.
Examples Dim ImpWid As Double
SCPI.CALCulate(1).PARameter(1).SELect
SCPI.CALCulate(1).SELected.TRANsform.DISTance.IMPulse.WIDTh = 1E-10
ImpWid = SCPI.CALCulate(1).SELected.TRANsform.DISTance.IMPulse.WIDTh
Related objects SCPI.CALCulate(Ch).SELected.TRANsform.DISTance. KBESsel on page 163
SCPI.CALCulate(Ch).SELected.TRANsform.DISTance.STEP.RTIMe on page 169
SCPI.CALCulate(Ch).SELected.TRANsform.DISTance.STATe on page 168
Equivalent key [Analysis] - Fault Location - Window - Impulse Width
Value
Description Impulse width
Data type Double precision floating point type (Double)
Range Varies depending on the frequency span and transformation type.
Preset value Varies depending on the frequency span and transformation type.
Unit s (seconds)
Note If the specified variable is out of the allowable setup range, the minimum value (if the lower
limit of the range is not reached) or the maximum value (if the upper limit of the range is
exceeded) is set.