Agilent Technologies ENA Series

Appendix C 163
COM Object Reference
SCPI.CALCulate(Ch).SELected.TRANsform.DISTance. KBESsel
SCPI.CALCulate(Ch).SELected.TRANsform.DISTance.
KBESsel
Object type Property
Syntax SCPI.CALCulate(Ch).SELected.TRANsform.DISTance.KBESsel = Va lu e
Val ue = SCPI.CALCulate(Ch).SELected.TRANsform.DISTance.KBESsel
Description For the active trace of channels 1 to 4 (Ch), sets the shape of the Kayser Bessel window
using β used for the transformation function of the fault location function.
Variable
For information on the variable (Ch), see Table C-2, “Variable (Ch),” on page 159.
Examples Dim Beta As Double
SCPI.CALCulate(1).PARameter(1).SELect
SCPI.CALCulate(1).SELected.TRANsform.DISTance.KBESsel = 3
Beta = SCPI.CALCulate(1).SELected.TRANsform.DISTance.KBESsel
Related objects SCPI.CALCulate(Ch).SELected.TRANsform.DISTance. IMPulse.WIDTh on
page 162
SCPI.CALCulate(Ch).SELected.TRANsform.DISTance.STEP.RTIMe on page 169
SCPI.CALCulate(Ch).SELected.TRANsform.DISTance.STATe on page 168
Equivalent key [Analysis] - Fault Location - Window - Kaiser Beta
Value
Description The value of β
Data type Double precision floating point type (Double)
Range 0 to13
Preset value 6
Note If the specified variable is out of the allowable setup range, the minimum value (if the lower
limit of the range is not reached) or the maximum value (if the upper limit of the range is
exceeded) is set.