6-41
Error Messages
ESG-D Series Signal Generator Instrument-Specific Error Messages
State Save Recall Error;Delete sequence <sequence_name> ignored.
Indicates that a STATE: file in a sequence that is being deleted could not be deleted due
to the file not being found, data corruption, etc. If state file exists, delete explicitly using
the memory catalog.
State Save Recall Error;The state file is from a different
firmware revision that does not support comments.
Indicates that an attempt was made to write a comment to a state file revision that does
not support comments. Comments in saved state files are not supported by the A.01.00
and A.01.01 releases of the instrument firmware.
To Next Page
Loading...
