Agilent Technologies G7114B User Manual

Agilent InfinityLab LC Series VWD User Manual 133
9Maintenance
Replace the Deuterium Lamp
1 Open the doors. 2 Locate the heater fan cover.
3 Unscrew the fan cover (1.) and remove it (2.). 4 Unplug the lamp connector.
5 Unscrew the two lamp screws (Pozidriv). 6 Remove the lamp and place it on a clean place.
NOTE
Do not touch the glass bulb with your fingers. It may reduce
the light output.
1.
2.

Agilent Technologies G7114B Specifications

General

Brand	Agilent Technologies
Model	G7114B
Category	Security Sensors
Language	English