20 Agilent N5181A/82A MXG Signal Generators User’s Guide
Setting Preferences & Enabling Options
Remote Operation Preferences
Configuring the LAN Interface
Enabling LAN Services: Browser, Sockets, and VXI-11
NOTES
Use a 100Base-T LAN cable to connect the
signal generator to the LAN.
Use a crossover cable to connect the signal
generator directly to a PC.
For details on using the instrument remotely, see
the Programming Guide.
tility > I/O Config >
See page 20
Listed in the
Programming Guide
Enable remote (browser) access to
the instrument’s file system.
Use a browser to control the signal generator.
Utility > I/O Config >
or details on each key, use key help
s described on page 23.
To Next Page
Loading...
Need help?
General
