Agilent N5181A/82A MXG Signal Generators User’s Guide 37
Basic Operation
Viewing, Saving, and Recalling Data
Saving and Recalling Data
The method of storing and recalling data depends on the data.
• An instrument state file contains instrument settings. For this type of file, use the Save and Recall
hardkeys, shown in Figure 3- 5 on page 38.
• For other types of data, use the Load/Store softkeys (shown below) that are available through the
menu used to create the file.
NOTE File names are limited to 25 characters.
Use this menu to enter the file name,
as described on page 24.
or details on each key, use key help
s described on page 23.
To Next Page
Loading...
