MND172201 P a g e | 28 Software Revision 1.4.1
Speed Type
Tank Sensor
The speed sensor is installed on a wheel or shaft that turns when the
seeder is in motion.
Mount the speed sensor within ½-inch of the magnet.
Tap Speed Type to display TANK SENSOR.
Proceed to Speed Cal.
ISO Ground/Wheel Speed
If paired with an ISOBUS Compliant Universal Terminal, the tablet
can display the speed from the CANBUS.
Tap Speed Type to display ISO GROUND or ISO WHEEL
Tablet GPS
To use the GPS on your Android tablet for speed:
Select the menu icon in the menu bar at the top right of the
main screen.
Select GPS Settings
The GPS Settings screen will appear.
Toggle the GPS Disabled soft key to display GPS Enabled.
Return to the Seeder Setup screen.
Tap Speed Type to display TABLET GPS.
Section Type
Section type lets the system know what kind of section control that
your air cart is using.
Toggle between On/Off Section (Bourgault, Morris, etc.)
and Motor RPM.
Section Logic
Section logic lets the system know the logic of your On/Off section
control.
Toggle between Switched Power and Switched Ground logic.
To Next Page
Loading...