i
WARNING
WARNING: WHEN USING ELECTRIC PRODUCTS, BASIC PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED, INCLUDING THE FOLLOWING:
WARNING
The DPS24 is designed to be used in a standard household environment.
Power requirements for electrical equipment vary from area to area. Please ensure that your DPS24 meets the
power requirements in your area. If in doubt, consult a qualified electrician or AKAI professional dealer.
120 VAC @ 60 Hz for USA and Canada
230 VAC @ 50 Hz for Europe
240 VAC @ 50 Hz for Australia
PROTECTING YOURSELF AND THE DPS24
• Never touch the AC plug with wet hands.
• Always disconnect the DPS24 from the power supply by pulling on the plug, not the cord.
• Allow only an AKAI professional dealer or qualified professional engineer to repair or reassemble the
DPS24. Apart from voiding the warranty, unauthorized engineers might touch live internal parts and receive
a serious electrical shock. There are no user serviceable parts inside.
• Do not put, or allow anyone to put any object, especially metal objects, into the DPS24.
• Use only a household AC power supply. Never use a DC power supply.
• If water or any other liquid is spilled into or onto the DPS24, disconnect the power, and call your dealer.
• Make sure that the unit is well-ventilated, and away from direct sunlight.
• To avoid damage to internal circuitry, as well as the external finish, keep the DPS24 away from sources of
direct heat (stoves, radiators, etc.).
• Avoid using aerosol insecticides, etc. near the DPS24. They may damage the surface, and may ignite.
• Do not use denatured alcohol, thinner or similar chemicals to clean the DPS24. They will damage the
finish.
• Modification of this equipment is dangerous, and can result in the functions of the DPS24 being impaired.
Never attempt to modify the equipment in any way.
• Make sure that the DPS24 is always well-supported when in use (either in a specially-designed equipment
rack, or on a firm level surface).
• In order to assure optimum performance of your DPS24, select the setup location carefully, and make sure
the equipment is used properly. Avoid setting up the DPS24 in the following locations:
1. In a humid or dusty environment
2. In a room with poor ventilation
3. On a surface which is not horizontal
4. Inside a vehicle such as a car, where it will be subject to vibration
5. In an extremely hot or cold environment
To Next Page
Loading...
Need help?
General
