EWI4000s Operator’s Manual rev 1.0
21
Assigning a Program number to the key note
You can change the Program number directly by touching the Note keys after assign-
ing a Program number to the Key note. Instead of increasing/ decreasing through the
Program numbers by using the [HOLD] or [OCT] button. This feature allows you to
access the Program you wish quickly during live performances.
Note:
You can only store one program number per Key note, regardless of the fingering or octave.
1. Select the Program number you wish to assign to
the Key note as described in “Selecting the inter-
nal Sounds (Program)”.
2. While holding in the [Program] key,
press the [SETUP] key
The selected Program number will blink
on the Program/Data display.
3. Touch the Note key you wish to assign to the selected program.
4. Blow into the Mouthpiece
The selected Program will be assigned to the Key note you touch.
To Next Page
Loading...
