Akai EWI 4000S

EWI4000s Operator’s Manual rev 1.0
25
Adjusting the Volumes for Sound / Effect
Adjusting the Main Volume
This procedure adjusts the main output volume of the EWI4000s. (01-30)
1. Press the [LEVEL] button
While pressing the [LEVEL] button, the cur-
rent volume value is shown on the Program/
Data display.
2. While continuing to press the [LEVEL]
button, adjust the volume by pressing
the [HOLD] or the [OCT] button.
The [HOLD] button works as ( + ), and the
[OCT] button works as ( - ).
Adjusting the volume of each Program
This procedure adjusts the output volume of each Program individually. This affects
only the output volume of the selected Program and does not affect the EWI’s main
output volume. The volume setting of each Program is stored in the EWI4000s.
1. Select the program you wish to adjust the volume.
2. While pressing the [LEVEL] button, press the [SETUP]
button.
The current volume value is shown on the Program/Data display.
3. Adjust the volume by pressing the [HOLD]
button or the [OCT] button.
The [HOLD] button works as ( + ), and the [OCT]
button works as ( - ).
4. Press the [SETUP] button.
The EWI4000s returns to the “PLAY” mode, and
your settings are stored internally.