EWI4000s Operator’s Manual rev 1.0
20
Chapter3:
Playing EWI4000s with Internal Sound
Chapter 3 Playing EWI4000s with Internal Sound
Selecting the Internal Sounds (Program)
Selecting the Internal Sounds (Program)
The EWI4000s has 100 internal preset sounds. Each sound is called a Program and
you switch between them by selecting its Program number.
1.
While not touching any Note keys, touch the [Program] key with your finger.
2. While holding in the [Program] key, you can select the Program number
you wish to play by pressing the [HOLD] button or the [OCT] button.
While showing the Program number by touching
the [Program] key, the [HOLD] button works as
“+” (increasing the Program number) and the
[OCT] button works as “-“ (decreasing the Pro-
gram number).
3. The sound will change to match the cur-
rently displayed Program number after you
release the [Program] key.
The current program number is displayed on the Pro-
gram/Data display while touching the [Program] key. If
you release your finger from
the [Program] key, the Pro-
gram/Data display returns to
its previous state. To switch to
a different program, hold in the [Program] key.
Note: If you touch any Note keys, the Program/Data display shows the program number
assigned to that specific note, not the currently selected Program number.
To Next Page
Loading...
