Akuvox R26 Series - Snmp; Vlan

R26/R23 Series
Admin Guide
9
Starting RTP Port: Determine the minimum port that RTP stream
can use.
3.3.2.4. SNMP
Go to Network - Advanced to configure. To display and configure
SNMP settings.
Active: To enable or disable SNMP feature.
Port: To configure SNMP server’s port.
Trusted IP: To configure allowed SNMP server address, and it
could be an IP address or any valid URL domain name.
Note: SNMP (Simple Network Management Protocols) is
Internet-standard protocol for managing devices on IP networks.
3.3.2.5. VLAN
Go to Network - Advanced to configure. To display and configure
VLAN settings.
Figure 3.3.2.5 VLAN
Figure 3.3.2.4 SNMP