Akuvox R26 Series Admin Guide

R26/R23 Series
Admin Guide
38
4.4.3.2. No Answer Action
Go to Intercom - Basic to configure.
No Answer Action: For sending the notification to specified email if
the call is not answered.
4.4.3.3. Push Button Action
Go to Intercom - Basic to configure.
Enable this function, the device will record any changes of the
surrounding environment then send the message or picture to the
corresponding receiver.
Action to execute: Tick the suit the suitable way to receive the
action message.
HTTP URL: If you tick HTTP URL, and then enter the HTTP server
IP address in the HTTP URL area. When the device detects any
changes, it will send HTTP network package.
Figure 4.4.3.2 No answer action
Figure 4.4.3.3 PushButton action

Akuvox R26 Series Specifications

General

Brand	Akuvox
Model	R26 Series
Category	Intercom System
Language	English