Akuvox R26 Series - Action; Action Parameters

R26/R23 Series
Admin Guide
36
Motion Detect Time Setting: To make motion detect time for a
whole week.
4.4.3. Action
R26/R23X supports to send notifications, snapshots via email and
ftp transfer method, or calls via SIP call method, when trigger
specific actions.
4.4.3.1. Action Parameters
Go to Intercom - Action to set action receiver.
Email Notification
Sender’s email address: To configure email address of sender.
Receiver’s email address: To configure email address of receiver.
SMTP server address: To configure SMTP server address of
sender.
Figure 4.4.3.1-1 Action parameters
Figure 4.4.2-2 Motion