R26/R23 Series
Admin Guide
4.4. Security
4.4.1. Anti-alarm
Go to Intercom - Advanced to configure.
R26/R23X integrates internal gravity sensor for the own security,
and after enabling tamper alarm, if the gravity of R26/R23X changes
dramatically, the phone will alarm. Gravity sensor threshold stands
for sensitivity of sensor.
4.4.2. Motion
R26/R23X supports motion detection, go to Intercom - Motion to
configure detection parameter.
Motion Detection: To enable or disable motion detection
Motion Delay: To configure minium time gap between two
snapshots.
To Next Page
Loading...
Need help?
General
