R26/R23 Series
Admin Guide
After all, press the push button to make direct IP call.
If you would like to call multiple numbers at the same time, divide
them by semicolon.
Note: The push button number can also enter the SIP account.
3.4.2. SIP Call
SIP calls which use SIP numbers to make or receive calls should be
supported by SIP server. Users need to register accounts and fill
SIP feature parameters before using it.
Go to Account - Basic to configure SIP account and SIP server for
door phone first. Then press the push button to make SIP call
.
3.4.2.1. SIP Account
Status: To display register result.
Display Label: To configure label displayed on the phone ’s LCD
screen.
Figure 3.4.2.1 SIP account
To Next Page
Loading...
Need help?
General
