R26/R23 Series
Admin Guide
Note: By default, NAT is disabled.
3.4.3. Auto Answer
Go to Account - Advanced to enable auto answer feature for SIP
call.
Go to Phone - Call Feature to enable auto answer feature for direct
IP call without SIP proxy.
Auto Answer Delay: To configure delay time before an incoming
call is automatically answered.
Auto Answer Mode: To set video or audio mode for auto answer by
default.
Then incoming call will be answered automatically.
3.4.4. Web Call
Go to Intercom - Basic to dial out or answer incoming call from
website.
Figure 3.4.3-1 Auto answer
Figure 3.4.3-2 Auto answer
Figure 3.4.3-3 Auto answer