R26/R23 Series
Admin Guide
configuration document from the server using TFTP / FTP / HTTP /
HTTPS network protocol. To achieve the purpose of updating the
device configuration, making the users to change the phone
configuration more easily. This is a typical C/S architecture upgrade
mode, mainly by the terminal device or PBX server to initiate an
upgrade request.
URL: Auto provisioning server address.
User Name: Configure if server needs an username to access,
otherwise left blank.
Password: Configure if server needs a password to access,
otherwise left blank.
Common AES Key: Used for phone to decipher common auto
provisioning configuration file.
AES Key (MAC): Used for phone to decipher MAC-oriented auto
provisioning configuration file (for example, file name could be
0C1105888888.cfg if phone’s MAC address is 0C1105888888).
To Next Page
Loading...
