AL-KO EKS 2000/35 - 12 Disposal; 13 Technical Data

GB
48 EKS 2000/35 | EKS 2400/40 | EKI 2200/40
Disposal
IMPORTANT! Danger of damage to the ap-
pliance. Dried/sticky saw chain oil can lead to
damage to oil-channelling components or the oil
pump after lengthy storage.
■
Remove the saw chain oil from the chain saw
before each extended period of storage.
12 DISPOSAL
Information on the German Electrical and
Electronic Equipment Act (ElectroG)
■
Electrical and electronic appliances do
not belong in household waste, but
should be collected and disposed of
separately.
■
Used batteries or rechargeable batteries that
are not installed permanently in the old appli-
ance must be removed before disposal. Their
disposal is regulated by the battery law.
■
Owners or users of electrical and electronic
appliances are obliged by law to return them
after use.
■
The end user bears personal responsibility
for deleting his personal data from the old ap-
pliance to be disposed of.
The symbol of the crossed-through rubbish bin
means that electrical and electronic appliances
may not be disposed of in the household rubbish.
Electrical and electronic appliances can be hand-
ed in at the following places at no charge:
■
Public service disposal or collection points
(e.g. municipal building yards)
■
Points of sale of electrical appliances (sta-
tionary and online) provided traders are
obliged to take them back or offer this volun-
tarily.
These statements only apply to appliances that
are installed and sold in the countries of the Eu-
ropean Union and are subject to European Direc-
tive 2012/19/EU. Different provisions may apply
to the disposal of electrical and electronic appli-
ances in countries outside the European Union.
13 TECHNICAL DATA
Type EKS 2000/35 EKS 2400/40 EKI 2200/40
Item no. 112807 112808 112809
Motor:
■
Rated voltage 230V (AC) /
50Hz
230V (AC) /
50Hz
230V (AC) /
50Hz
■
Maximum motor power 2000W 2400W 2200W
■
Idle speed 7600rpm
+/-10%
7600rpm
+/-10%
7600rpm
+/-10%
Volume of the chain oil tank 150ml 150ml 200ml
Guide rail:
■
Type OREGON OREGON OREGON
■
Length/effective cutting length 14" (SD) /
325mm
16" (SD) /
375mm
16" (SD) /
375mm
Chain sprocket:
■
Number of teeth 6 6 6
■
Pitch 3/8" 3/8" 3/8"
Saw chain:
■
Type 91PJ052X 91PJ056X 91PJ056X