Alcatel-Lucent 1830 PSS-16 - Page 535

...................................................................................................................................................................................................
2
Perform the steps in the procedure “LANRFI” (p. 2-123) on the far end port.
RFIL
RFIL (Remote Fault Indication)
An RFIL condition may be raised on a client or network SDH port of the listed line cards
and may be attributed to a fault on the remote device (the equipment connected to the
client or network port). The remote device is either detecting a problem on its receive link
or has some sort of local fault and is generating an RFI in the downstream direction.
Severity Not reported
Service affecting? No
Applicability 11STMM10
Corrective Action
NOTICE
Service-disruption hazard
A cold reset, reseat, or replacement of a card is service impacting if the card is currently
carrying services. To determine if any services are currently carried over a card, perform
the procedure “Reseating a Card” (p. 3-19).
If
there are services currently carried over the card, it may be best to wait for a
maintenance window before resetting, replacing, or reseating the card.
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
1
Retrieve alarms and conditions for the local NE that has the RFI-L condition on its
receive port. Examine them and identify faults on the services supporting the devices that
have the RFI-L condition. Resolve any issues with respect to these faults first.
...................................................................................................................................................................................................
2
Repeat Step 1 for the far end device. Examine the devices associated with the same
services.
Trouble-clearing procedures
RFIEGR
RFIEGR (Remote Client Remote Fault)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
2-285
E ND OF STEPS
...................................................................................................................................................................................................